PoolMaster Vinyl Swimming Pool Quick Patches P/N: 30274 Directions: 1. Patch can be used on any wet or dry smooth surface. 2. Ensure area to be repaired is completely clean. 3. Cut repair patch approximately 3/4" larger than hole; cut patch with rounded corners. 4. Separate paper back from patch. 5. Place patch over center of hole and press firmly, working out all air and water bubbles from under patch to the edges. 6. DO NOT disturb patch for approximately thirty minutes. The longer patch remains, the more positive the bond. 7. For inflatables, do not inflate for 30 minutes.

WARNING!
The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Similar products