Anderson Leakmaster Epoxy Stick Pool Repair Putty P/N: PP701 Pool Repair Putty is a hand kneadable specialty epoxy that mixes in just one minute for permanent repairs to damp, wet areas and underwater surfaces. It will bond tenaciously to fiberglass, metal, wood, concrete, ceramic, glass, and most plastics including PVC. Hardening takes place in 20 to 30 minutes at which time Pool Repair Putty can be drilled, tapped, sanded, or painted. Pool Repair Putty contains a special fading dye that becomes berglass white after mixing and stays bright white even after exposure to U. V. Application Directions: Break or cutoff required potion of material. Twist and knead in hands until uniform color is achieved. (Do not "over-knead" putty once a uniform color has been achieved as skin oils will reduce "tackiness".) Force putty into any holes or cracks. For pipe repairs form a cuff that surrounds the entire pipe with putty. Once in place do not overwork. Any movement will break bonds that begin to form immediately. Hints For Use: Clean and roughen surface with sandpaper or file for best adhesion. Pool Repair Putty can be drilled, filed, tapped, sanded, and machined after several minutes of hardening. When applying putty underwater it may be helpful to use the polyethylene wrapper to keep putty from sticking to fingers. Wash hands thoroughly with soap and water after use. Not recommended for polyethylene or polypropylene plastics. Physical Properties Working Life: 20 - 30 Min. Shelf Life: 1 year + in container Shore D Hardness: 65-70 Tensile Strength: 6,000 PSI Maximum Use Temp.: 250F Shrinkage: less than 1% Electrical Res.: 30K megaohms Dielectric Str.: 12 kv/mm @ 3mm