Pool Putty Resin & Hardener White 14 oz. 40/CS (2 Part) P/N: 530318 Application Tips: Underwater Repairs: Area to be repaired must be free of loose particles, slime and algae. Mix equal amounts of resin and hardener thoroughly, above water, until putty is uniform in color. For best adhesion, press putty firmly into areas requiring repair. Above Water Repairs: Area to be repaired must be thoroughly cleaned. Removed grease, loose particles and rust. For best adhesion, roughen surface with wire brush or sandpaper. Mix equal amounts of resin and hardener thoroughly until putty is uniform in color. For above water repairs the putty can be contoured or smoothed by carefully rubbing with a wet sponge. Note: After using, replace caps over remaining materials. Use with equal amount of resin from white tube.

WARNING!
The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Similar products